WAP Via Broadband - Yes, It's Possible read in :)

[hhh23795e]

Just kidding, depending on your Bluetooth drivers/software you may need to start a Bluetooth serial port service before starting the proxy or set it up to connect automatically when windows accesses the com port.
Or Windows firewall could be blocking the ports, If i remember correctly the first time i did this the Firewall poped up and asked if i wanted to allow the port numbers or continue blocking(or something like that).



Tu laa..ko xtau,apek tuh lyn 4stroke je,dia anti 2stroke...tu psl bile ko tny 125 dia trus wat xlayan.
Sok ko pegi balik cuba ckp,"Apek.....itu diagram enjin utk YAMAHA 125Z 4stroke ada ka? Saya mau kasi tgk la...."
Klu dia kasi,mmg sah la dia anti 2stroke...muahahahahha...

p/s1:klu kat tmpt ko xtau la,klu kat sini byk je,bule kata setiap kedai sparepart ada.Ko try la gi kedai sparepart yg lain.
p/s2:Oi...get ready utk perbincangan V6.Dah page11 dah ni.lps ni musti mod dtg kasi lock...hehehe

[beast0rz]

Wow, this is doing my head in haha. All I want to do is use MSN whilst in bed! *is lazy*

So I installed all the software, read the tutorials and every post in the forum and I still can't manage to get it sorted :$

I start OperaMini from the device explorer, it runs but never connects. I tried making a new data comms/internet profile with my computer IP (I tried the IP of my router and of my PC also) and had no luck at all. I'm using a SE K750i (which I just got and LOVE). Can anybody help me out? I'm using the DCU-80 cable or whatever it's called - USB.

Cheers

[dorty]

: dnt know
Also installed already the whole bunch .. (i used it for developing java-apps ...) ..
However the Bluetooth-Connection works ... can up/download/install/debug ...
created the profiles an tryd all the ips i have (only 2 *g*, 1 bluetooth-ip-net and 1 dialup) ... started opera-mini via devex. an noticed that it looks like the theres nothing transmitted via bluetooth for this request... (se-bluetooth-data-counter doesnt change) .. the Java debugging says "No Connection" .oO( cant get a connection over bluetooth )
so .. profiles are ready and networking in devexp. is enabled .. restartet everything some times .. but the connection request doesnt get tunneld .. there happens also nothing when i enabled proxy and set it up to an ip .. these requests also dont produce any bluetooth-tunnel-traffic ... so it seams like the phone is not able to tunnel these tcp/ip-requests through bluetooth ... now its a w550i with newer firmware an i started asking my self if its possible that the w550i have to support Bluetooth-Networking ... but i dont think thats the reason cause this service is missing exept it only exist in older firmwares :rolleyes: mhm so ... the big question is .. why doesnt the phone tunnel the requests .. profiles are created and selected .. all other profiles are deleted (to prevent false-postiv) .. any idea?

the big thing that bugs me really up is that it looks like it must be a setting in the phone .... cause i think the devex. already tells the apps to redir. the traffic.. (enabled networking) .. so this is very ...
mhm perhaps it works with the SEPM .. (when its released) ..

naaahhh however till someone have an idea i will take a look an the devexp. libs about networking-tunneling ... *hmpf*

and sorry for my bad english ... its been a long time since....

[tnv]

just wen i start downloadin from opera mini....its gives error and the application shuts down...

y is dat? i have been told that one can download from opera mini

[dorty]

ok i set the serialproxy to debug-level-high mhm theres a strange message i think:
[04.07.06 14:24] SLIP.isReader.run() read 18 bytes: À[04.07.06 14:24] SerialProxyController: socket accepted on port: 6079

mhm strange looks like data-get-transmitted via bluetooth but the ConnectProxy doesnt count it ... but after all the Data-Looks like **** ...
dunno ... atleast the DevExp. doesnt do any network-activity...

[speedyandre]

ok i set the serialproxy to debug-level-high mhm theres a strange message i think:
[04.07.06 14:24] SLIP.isReader.run() read 18 bytes: À[04.07.06 14:24] SerialProxyController: socket accepted on port: 6079

mhm strange looks like data-get-transmitted via bluetooth but the ConnectProxy doesnt count it ... but after all the Data-Looks like **** ...
dunno ... atleast the DevExp. doesnt do any network-activity...

Maybe the bluetooth connection is marked secure in your bluetooth settings, try unsecured instead.
Also a firewall (xp default for network connections) can block your IP.
Sometimes the connection speed in the SE proxy is set to high, try 230400.

André

[bedhead42]

hey everybody im new to the forms and im having a lil trouble.

ok i got everyting to work except for the last step, the list.bat dosent work for me, it could be because i have the sony ericsson tool installed on my E drive so i edited the bat file and it still dosent work. so i was wondering if the #s i am supposto get from the file are the same for everyone, and if someone could give them to me. thanks.

[speedyandre]

hey everybody im new to the forms and im having a lil trouble.

ok i got everyting to work except for the last step, the list.bat dosent work for me, it could be because i have the sony ericsson tool installed on my E drive so i edited the bat file and it still dosent work. so i was wondering if the #s i am supposto get from the file are the same for everyone, and if someone could give them to me. thanks.

The #s differ on each phone, so you'd better use list.bat to get the #s and change them.
Get the properties of list.bat and check the Find target option, you should find the ejava.exe and then apply the changes you made.
Else let explorer find the ejava.exe for you.

André

[foo25]

Hey, I posted on this a good while back with problems and then finally got it sorted. Well since then I got a new hard drive for my laptop and reinstalled all the software and stuff and configured my firewall like I had to do before, but again I'm having problems :S I continually get the message -

You do not have a working network connection. Please visit http://help.opera.com/mini with your desktop browser for instructions.(error:3.0.10:80/).

I have tried everything from setting up new internet profiles mentioned to configuring my firewall to trying different ports and different baud rates, but nothing seems to make it work (double checked serial networking is checked). I'm really confused this time as it worked fine before, and I've only updated firmware since and got new hard drive :S Can anyone give me any suggestions?? Just ordered a bluetooth dongle and I really want to use the internet wirelessly at home!

[dorty]

uhm .. anyone sean this working on an w550i ? *g*
i noticed via USB-Sniffer that opening a link opera doesnt produce any special usb-activity .. so i've started asking my self if works ?
(yes started opera via devexp)

[speedyandre]

uhm .. anyone sean this working on an w550i ? *g*
i noticed via USB-Sniffer that opening a link opera doesnt produce any special usb-activity .. so i've started asking my self if works ?
(yes started opera via devexp)

Someone in this topic made a new data account with his pc's local IP in it and then it worked for him :)
If you can start applets with device explorer then the only problem probably is a missing path to your pc's internet connection.

André

[swebarb]

Hi all,

I got a problem the 3 download links at the bottom to get the internet to work are dead.. where to get the :(

http://users.skynet.be/yozy/tutorials/k750-1.htm#

[speedyandre]

I've put the orignal links in this post (http://www.myforum.lasyk.net/showpost.php?p=234868&postcount=110) :)
Maybe Kobrakaan can add them to his start post?

André

[kobrakaan]

I've put the orignal links in this post (http://www.myforum.lasyk.net/showpost.php?p=234868&postcount=110) :)
Maybe Kobrakaan can add them to his start post?

André

DONE :D

[tubrody]

Ok, so I've read through the whole thread and also a similar thread in another site and still can't get the thing to work. I have the w810i.

Sorry for the long post, but I am really going crazy here, I've tried everything I can think of. : dnt know

The Connection proxy connects fine to the phone and I can start the opera mini from the Device explorer. But every time I test the connection on the opera mini I get that 10.0.1:80 error when testing connection.

I am using the usb cable and the Connection Proxy is in COM7 at 57600.

One BIG doubt I have is, what port am I supposed to have for the proxy in the Internet profile of the phone? The default in the phine config is 8080, I have tried that and also other ports the Connection Proxy shows to be using in the log.

I have tried many things, this is my current config:

Connected to phone to laptip through the phone's USB cable

Settings->Connectivity->Data Comm->Data Accounts->"MyNewAccount":GPRS Data:
APN: <empty> (default)
Username: <empty> (default)
Password: <empty> (default)
Login Request: Off (default)
Allow calls: Automatic (default) - other option is GPRS
IP Address: ... (empty - I have tried putting my laptop's IP here too)
DNS address: ... (empty)
Authentication: (default) Checked: None, PAP, CHAP
Data compression: off (default)
Header compression: off


Internet Settings->Internet profiles->"Laptop"->More->Settings:
Connect using: MyNewAccount
Use proxy: yes
Proxy address: 192.168.0.101 (My laptop's address in my local lan, the one assigned by my router's DHCP)
Port number: 8080 (default, I have also tried port numbers from the Connection proxy log: 6080, 6081, 6082, 6083 and 6084)
Username: <empty>
Password: <empty>


sdkme.properties file:
#Sun Jul 16 03:00:11 EDT 2006
proxy.tries=5
timeout.readatcmd=5000
tool.open.tcpip.port=6082
comm=COM7
serialproxy.disable_cable_pull_listener=false
logs.ejavatool=3
logfile.ueitool=/logs/uei.log
tool.default.tcpip.port=6080
databits=8
logfile.guitool=/logs/guitool.log
ueitool.loglevel=LOW
port.map.kdwp.6083=6
jdm.start=AT*SESSTCP
port.instancecontrol=6079
port.odcl=6084
segment.size=256
proxy.loglevel=LOW
jdm.stop=close
ejavatool.loglevel=LOW
ping.time=10000
port.map.sstcp.14=6084
flowcontrol.in=None
logs.proxy=3
timeout.tool=10000
logfile.proxy=/logs/connectionproxy.log
logs.ueitool=3
baud=57600
parity=None
baud.selections=9600, 14400, 28800, 38400, 57600, 115200, 230400, 460800, 921600
guitool.loglevel=LOW
timeout.proxy=4000
tool.install.tcpip.port=6081
stopbits=1
logs.guitool=3
flowcontrol.out=None
port.map.tcpip.6082=4
port.map.tcpip.6081=11
logfile.ejavatool=/logs/ejavatool.log
port.map.tcpip.6080=7

Connection proxy log:
[7/16/06 4:37 PM] Logger initialized, level: 3, max size: 0, log: C:\SonyEricsson\JavaME_SDK_CLDC\OnDeviceDebug\logs \connectionproxy.log
[7/16/06 4:37 PM] Setting connection state to: DISCONNECTED
[7/16/06 4:37 PM] SerialProxy.connect() called. State = DISCONNECTED
[7/16/06 4:37 PM] connecting to phone
[7/16/06 4:37 PM] Setting connection state to: CONNECTING
[7/16/06 4:37 PM] SerialProxy starting
[7/16/06 4:37 PM] SerialProxy.connect() called. State = CONNECTING
[7/16/06 4:37 PM] connect() returning. Must be disconnected before trying to connect to phone.
[7/16/06 4:37 PM] SerialProxy: Creating KDWP Bridge from = 6083 to = 6
[7/16/06 4:37 PM] SerialProxy: Creating TCP/IP Bridge from = 6082 to = 4
[7/16/06 4:37 PM] [TCP:6083->SSTCP:6] KdwpBridgeManager waiting for signal from KVM on port 6 ...
[7/16/06 4:37 PM] SerialProxy: Creating TCP/IP Bridge from = 6081 to = 11
[7/16/06 4:37 PM] SerialProxy: Creating TCP/IP Bridge from = 6080 to = 7
[7/16/06 4:37 PM] [TCP:6080->SSTCP:7] openBridge() around Socket[addr=/192.168.0.101,port=2727,localport=6080]
[7/16/06 4:37 PM] [TCP:6080->SSTCP:7] bridge created
[7/16/06 4:37 PM] Setting connection state to: CONNECTED
[7/16/06 4:37 PM] connected
[7/16/06 4:37 PM] [TCP:6080->SSTCP:7] openBridge() around Socket[addr=/192.168.0.101,port=2729,localport=6080]
[7/16/06 4:37 PM] [TCP:6080->SSTCP:7] bridge created
[7/16/06 4:37 PM] [TCP:6080->SSTCP:7] openBridge() around Socket[addr=/192.168.0.101,port=2730,localport=6080]
[7/16/06 4:37 PM] [TCP:6080->SSTCP:7] bridge created
[7/16/06 4:37 PM] [TCP:6082->SSTCP:4] openBridge() around Socket[addr=/192.168.0.101,port=2732,localport=6082]
[7/16/06 4:37 PM] [TCP:6082->SSTCP:4] bridge created

after I start opera mini from device manager this gets appended :
[7/16/06 4:38 PM] [TCP:6080->SSTCP:7] openBridge() around Socket[addr=/192.168.0.101,port=2837,localport=6080]
[7/16/06 4:38 PM] [TCP:6082->SSTCP:4] openBridge() around Socket[addr=/192.168.0.101,port=2836,localport=6082]
[7/16/06 4:38 PM] [TCP:6080->SSTCP:7] bridge created
[7/16/06 4:38 PM] [TCP:6082->SSTCP:4] bridge created
[7/16/06 4:38 PM] [TCP:6082->SSTCP:4] openBridge() around Socket[addr=/192.168.0.101,port=2838,localport=6082]
[7/16/06 4:38 PM] [TCP:6082->SSTCP:4] bridge created
[7/16/06 4:38 PM] [TCP:6083->SSTCP:6] KdwpBridgeManager signal received from KVM.6
[7/16/06 4:38 PM] [TCP:6083->SSTCP:6] KdwpBridgeManager TCP/IP server socket opened on port 6083

after I test the connection from opera mini getting error: 3.0.10:80, NOTHING gets appended to log

after I stop opera mini from device explorer, this gets appended to log:
[7/16/06 4:43 PM] [TCP:6080->SSTCP:7] openBridge() around Socket[addr=/192.168.0.101,port=3116,localport=6080]
[7/16/06 4:43 PM] [TCP:6080->SSTCP:7] bridge created
[7/16/06 4:43 PM] [TCP:6082->SSTCP:4] [br:26956311] [tool->phone] couldn't read, assuming closed
[7/16/06 4:43 PM] [TCP:6082->SSTCP:4] [br:26956311] [tool->phone] java.net.SocketException: socket closed
[7/16/06 4:43 PM] [TCP:6082->SSTCP:4] sending error message: <status code="6" info="IOException reading from Serial Socket"/>
[7/16/06 4:43 PM] [TCP:6082->SSTCP:4] IOException returning error code to tool.
[7/16/06 4:43 PM] [TCP:6082->SSTCP:4] java.net.SocketException: Socket closed
[7/16/06 4:43 PM] [TCP:6082->SSTCP:4] openBridge() around Socket[addr=/192.168.0.101,port=3118,localport=6082]
[7/16/06 4:43 PM] [TCP:6082->SSTCP:4] bridge created


PLEASE HELP, thanks

[swebarb]

NM i got it to work without thoose 3 files u needed to download..

Tryied google maps for fun and it worked.. lol so great.

[bedhead42]

...................


Internet Settings->Internet profiles->"Laptop"->More->Settings:
Connect using: MyNewAccount
Use proxy: yes
Proxy address: 192.168.0.101 (My laptop's address in my local lan, the one assigned by my router's DHCP)
Port number: 8080 (default, I have also tried port numbers from the Connection proxy log: 6080, 6081, 6082, 6083 and 6084)
Username: <empty>
Password: <empty>

................

ok id put the ip address of your router its self, thats what i did and it works.

[tubrody]

>ok id put the ip address of your router its self, thats what i did and it works.

I just tried using my router's ip as you suggest and tried different flavors of it too, no luck....

what phone/config are you using?

any other ideas or possible things I might be setting up wrong?

what about the proxy port setting in my phone? should I leave that at 8080?
the Connection proxy seems to be using a bunch of 608x ports...
Anyways I tried that too with no luck

I've spent my whole weekend just trying this.....
hopefully someone can help,

thanks

[tnv]

i dunno wot happens to all ppl out there when connectin fon with pc. i've been usin my internet conn through my fon from da last yr, and yet i havent found any prob with neither w550i or w810i. so lets make it simple tubrody.

1) delete all your existing data accounts and internet profile from your phone (you dont need anything to use the internet via Opera)

2) make sure that you have installed SE J2ME SDK properly
3) now connect your phone through usb cable
4) select phone mode
5) now open "connection proxy" from j2me folder
6) go to settings and select either "com 8" or "com 9" with "921600" or any baud rate.
7) click on OK and then CONNECT
(your phone should now be connected to your pc)
8) now open "devise explorer" and make sure that there is a tick mark beside "serial networking" if not, then turn it on (dont forget to restart devise explorer after turning it on)
9) lastly double click opera mini in your devise explorer to start the app

your phone should now be able to use your pc or laptop's internet connection

NOTE : once you use opera mini and disconnect your phone from the pc, you have to restart your phone to work it for the next time you use it. and if you find any error at the first place then turn off ur phone and then turn it on again. so everytime you want to use the PC internet connection you have to restart your phone to work errorfree.

I hope it helps tubrody

[tubrody]

tnv:
ok, so I did all that, now I am no loger getting the error, but Opera mini starts "processing" and then I get popup error on the desktop coming from the device explorer saying: "Device Explorer detected a hanging connection proxy and closed it. Restart by refreshing device information.
(You may change the timeout.tool property in the sdkme.properties file)"

Now I tried both a higher and a lower number in the timeout.tool property in the sdkme.properties file but still got the same error.

Any more ideas? I feel I am getting close...

thanks

[tnv]

hmmm.......i think you have to attach your cable to ur phone as well as ur usb port properly. probably the error occured due to loose attachments.
if dats not the prob, then reduce ur baud rate to 57600 from "connectionproxy" and undo any modifications dat u have made to sdkme.properties file.

[dorty]

@tnv: thanks ... deleting all the Profil's told in the Tutorials worked ... now it works on my w550i (to create an .... profil stuff is just unnessary)
(now i think (perhaps) i will create an obex-application to quicker-launch the applications)

[marurder125]

ok, so I did all that, now I am no loger getting the error, but Opera mini starts "processing" and then I get popup error on the desktop coming from the device explorer saying: "Device Explorer detected a hanging connection proxy and closed it. Restart by refreshing device information.
(You may change the timeout.tool property in the sdkme.properties file)"

Now I tried both a higher and a lower number in the timeout.tool property in the sdkme.properties file but still got the same error.

Any more ideas? I feel I am getting close...

If you are using the usb cable make sure you are using the right com port, other people were having similar problems earlier in the thread.

http://myforum.lasyk.net/showpost.php?p=242214&postcount=180

[muhammad adeem]

how can i use netservice via bluetooth in w900i

[speedyandre]

NOTE : once you use opera mini and disconnect your phone from the pc, you have to restart your phone to work it for the next time you use it. and if you find any error at the first place then turn off ur phone and then turn it on again. so everytime you want to use the PC internet connection you have to restart your phone to work errorfree.

I hope it helps tubrody

You don't have to restart the phone unless bluetooth hangs. You can test bluetooth by sending a pic to your pc (using obex) or use HID remote, if this works then bluetooth is still running fine.
You also can disconnect the serial bluetooth connection from your bluetooth driver and then reconnect it.
If all this doesn't work then restarting the phone is the way to go because sometimes the phone's bluetooth stack gets unstable, with older firmwares this is more likely to happen then when using the most recent firmware ;)

André

[tnv]

i dont know much about bluetooth as i dont have any bluetooth dongle. my earlier post was only for the usb cable DCU-60. :)

[speedyandre]

i dont know much about bluetooth as i dont have any bluetooth dongle. my earlier post was only for the usb cable DCU-60. :)

I was sleeping again :p
Because I've got bluetooth I don't use the usbcable unless I want to charge the phone, so I don't know about a hanging connection when using the usbcable.
It's probably the same serial port in the phone that makes the connection hang.
When I loose the internet connection and bluetooth still works I simply restart Opera-mini and then it connects again ;)

André

[blackz90]

ermmm
the miniborwer.Ink cant seem to be downloadable
even the 1 u posted on this thread
it says smtg like
unable to save
try saving in other location
i tried in other location but still fail...

the list.bat also not working for me it says

"system unable to find specific file'
den ask me to press any key to continue
whn i do it quits da cmd

y is dat so

hELP NEEDED

[kobrakaan]

ermmm
the miniborwer.Ink cant seem to be downloadable
even the 1 u posted on this thread
it says smtg like
unable to save
try saving in other location
i tried in other location but still fail...

the list.bat also not working for me it says

"system unable to find specific file'
den ask me to press any key to continue
whn i do it quits da cmd

y is dat so

hELP NEEDED


PLEASE TAKE THE TIME OUT TO READ THE WHOLE THREAD FROM THE BEGINNING!!!!! :mad:

THEY ARE IN THE 1ST POST SPEEDY REPOSTED them and i quoted them in the VERY FIRST POST !!!!


this is the first post of the thread (http://myforum.lasyk.net/showpost.php?p=228344&postcount=1)

they work fine i just downloaded them again from the post above!

[speedyandre]

PLEASE TAKE THE TIME OUT TO READ THE WHOLE THREAD FROM THE BEGINNING!!!!! :mad:

THEY ARE IN THE 1ST POST SPEEDY REPOSTED them and i quoted them in the VERY FIRST POST !!!!


this is the first post of the thread (http://myforum.lasyk.net/showpost.php?p=228344&postcount=1)

they work fine i just downloaded them again from the post above!

Whehehehe calm down, it's only a forum :p

@blackz90:
The list.bat points to the software from SE that you have installed (I hope you did) but if you install it on a different location like disk D:\ then edit list.bat and let it point to the new location of ejava.exe.
The JDK mirror is down at the moment Kobrakaan : dnt know

André

[kobrakaan]

Whehehehe calm down, it's only a forum :p

@blackz90:
The list.bat points to the software from SE that you have installed (I hope you did) but if you install it on a different location like disk D:\ then edit list.bat and let it point to the new location of ejava.exe.
The JDK mirror is down at the moment Kobrakaan : dnt know

André


LOL you would not believe how many PM's ive had since this thread started askin for the missing files and even after the mirror has been posted in the VERY FIRST post they still PM and ask me for them :mad:

the jdk link is also updated and working now for jdk-6-rc-bin-b93-windows-i586-27_jul_2006.exe :)

[speedyandre]

I'm downloading the new JDK, maybe some new things are in it ;)

André

[blackz90]

ok i read all d but still have problem

1st im using SDK 2.2.4 latest i guese
and also JDK 1.6 with Jre 1.6 also

so whn i first install SDK it says jdk is needed so i put the 1.6 jdk one

after install it can detect my phone n all but whn i try click on the minibrower.lnk a pop up comes out saying this

"C:\documents..........and so on\temp\15jlm0zv.lnk could not be save, because an unknown eror has occured. try saving on a different location"

so i save on other location it can be saved but whn i double clink on the minibrower.Ink it says

"the drive or network connection that the shortcut "minibrowser.Ink" refers to is unavailable.Make sure the disk is properly inserted or the network resourse is available, and then try again."

sigh any idea?

then about the list.bat

i found out the way..

[blackz90]

erm okie i found out that the SDK 2.2.4 has a different path name
so i change the path name
so the minibrowser.Ink can target to C:\sony.... bla bla.....\bin\ejava
then i use list.bat n found out the id n entry point
so i open the shortcut n edit the target part in the end there afta
....\bin\ejava.exe start <id><entrypoint> s

correct?

but then whn i open opera with SDK still cant any idea?

whn i open opera with SDK den i use the phone to enter google search or wadeva it will come out smtg asking me wheater to allow aplication to connect den i press yes it will say connection not working smtg like that...

btw im using usb to conect to pc i will get a bluetooth adapter soon but i would like to ensure that this could use befor i get 1

[speedyandre]

but then whn i open opera with SDK still cant any idea?

whn i open opera with SDK den i use the phone to enter google search or wadeva it will come out smtg asking me wheater to allow aplication to connect den i press yes it will say connection not working smtg like that...

btw im using usb to conect to pc i will get a bluetooth adapter soon but i would like to ensure that this could use befor i get 1

Correcting the path is ok, so it can find the software now :)
If the connection still doesn't work then you may need to make a new data profile on your phone with your pc's IP in it, the rest can be left empty.
Then go to internet and java settings on the phone and let them point to this new data profile.
This way the internet gateway can be found, else Opera-mini tries to use an existing data account.

André

[blackz90]

well
i tried the steps u listed
it seems to work half..
u see whn i start opera with SDK then uses my phone to go to a site it shows de in progress word bellow... but then on my pc the connection proxy windows will show the device is disconecting then a pop up will tell me that what time up and ask me to change the time out settings in the preference n so i did but still it makes no differents... any1 facing these types of problem.. its kinda fustrating not able to do this... does it concern my com port speed i already set it as the same as shown in the device manager COM ports speed

[speedyandre]

Device explorer makes a log of what happens, can you copy it and show it here?
Maybe some tcp or udp port is closed and blocks the internet packets ....
If you have a firewall then maybe it blocks some needed ports.

André

[blackz90]

[8/1/06 3:11 PM] Logger initialized, level: 3, max size: 0, log: C:\SonyEricsson\JavaME_SDK_CLDC\OnDeviceDebug\logs \guitool.log
[8/1/06 3:11 PM] Performing task: com.sonyericsson.sdkme.deviceoperations.e
[8/1/06 3:11 PM] Attached hanging proxy monitor; will shutdown if connection proxy hangs.
[8/1/06 3:11 PM] Performing task: com.sonyericsson.sdkme.deviceoperations.k
[8/1/06 3:12 PM] stopped reading from handset out stream
[8/1/06 3:12 PM] stopped reading from handset out stream
[8/1/06 3:12 PM] Detected hanging proxy, trying to shut down.
[8/1/06 3:12 PM] Device Explorer detected a hanging connection proxy and closed it.
Restart by refreshing device information.

(You may change the timeout by altering the timeout.tool property in the sdkme properties file.)


this is what i have
any idea?

[BUGabundo]

I've heard from someone that the connection is more stable when you setup a new data-account.
In my K750 there is one allready because in the beginning I thought it was needed to get it all working.

apn = empty
username and password = empty
IP is my pc's network IP
Other fields are defaults

In the internet- and java settings I point to this new data-account.
Another advantage of this is that my phone can't use gprs when I don't want it to.

André
thats a great tip...
i've been looking for a way to block it from going to the web... but never remembered this one. Its now working fine
Thanks

[speedyandre]

[8/1/06 3:11 PM] Logger initialized, level: 3, max size: 0, log: C:\SonyEricsson\JavaME_SDK_CLDC\OnDeviceDebug\logs \guitool.log
[8/1/06 3:11 PM] Performing task: com.sonyericsson.sdkme.deviceoperations.e
[8/1/06 3:11 PM] Attached hanging proxy monitor; will shutdown if connection proxy hangs.
[8/1/06 3:11 PM] Performing task: com.sonyericsson.sdkme.deviceoperations.k
[8/1/06 3:12 PM] stopped reading from handset out stream
[8/1/06 3:12 PM] stopped reading from handset out stream
[8/1/06 3:12 PM] Detected hanging proxy, trying to shut down.
[8/1/06 3:12 PM] Device Explorer detected a hanging connection proxy and closed it.
Restart by refreshing device information.

(You may change the timeout by altering the timeout.tool property in the sdkme properties file.)


this is what i have
any idea?

It seems that it can't get the serial connection running, maybe things work better if you change to a lower usbspeed on your pc, choose usb1.1 in stead of usb2.0 (settings are in bios of your pc, press DEL when starting up).
This could give problems with other usb devices, they may be recognized and installed as new found devices :o
Else I can't think of what the problem is, maybe the cable makes a poor connection due to dirty contacts on it ....

André

[bonkers]

iam using k750i to w800i iis it possiable to do it with the w800i firmware as it is not working for me :/

[speedyandre]

iam using k750i to w800i iis it possiable to do it with the w800i firmware as it is not working for me :/

What do you mean, did you flash your K750i to W800i: dnt know
It works with both, only finding and connecting the BT serial port on your pc is difficult sometimes ....
Please tell what works (using BT) and what doesn't :)

André

[bonkers]

i got a connection now, but desktop profile does not connect and when i connect opera thru the device explorer it just says processing to get to a website for ages and then doesnt connect?

[defkorn]

Same here like like bonkers. Im connected, but i realy dont unerstand the last step with the Remote control, minibrowser.ink stuff etc..

[speedyandre]

The stuff with the shortcuts is made to be able to start applets from your phone, not from your pc with Device explorer ;)
To get this working you first make the HID thing work (SE remote control) and then you can start things on your pc from your phone.
HID also can control your pc, the joystick moves the mouse on your pc.

My idea was that's quite useless to sit in front of your pc and then start applets on your phone using device explorer.
It's more fun to be somewere else and then do the same from your phone :)

It depends on your bluetooth drivers if your pc can accept HID commands without first manually setup a HID connection from your pc.
The bluetooth software lets you make a HID connection to your phone manually and then installs HID stuff in XP when it was not there yet.
The new 5.xx Widcomm drivers and BT2.0 Toshiba drivers can accept HID commands from your phone even when a HID connection is not present.

To get all this working you have to configure minibrowser.lnk on your desktop by inserting the numbers you can find when you run list.bat.
All what list.bat does (when Device explorer can connect) is listing the numbers of the applets on your phone in a dos prompt window.
You then can write them down or print them for later use.

André

[bonkers]

yeh i understand speedy, its just that when i run list.bat it doesnt give me no numbers it says: The System cannot find the path specified and its in the correct folder.

[speedyandre]

yeh i understand speedy, its just that when i run list.bat it doesnt give me no numbers it says: The System cannot find the path specified and its in the correct folder.

That's strange, if find target works, then it should be no problem.
Maybe you can change ejava to ejava.exe :)

I've added list1.bat to the files, it creates list.txt on the desktop so you can copy and paste the numbers from list.txt.
When you open list.txt in Wordpad all applets are displayed like in the dos box.
Notepad puts all on one line and makes it difficult to read ;)

André

[taha85khan]

hie all..! m new here i av done all things correctly...my phone is detected...everything works perfectly but when i start Operamini from device explorer and test the connection it say's u donn't av any working connection...NOw can anyone here help me please..1 coz m doing this from last two days

[bonkers]

I've added list1.bat to the files, it creates list.txt on the desktop so you can copy and paste the numbers from list.txt.
When you open list.txt in Wordpad all applets are displayed like in the dos box.
Notepad puts all on one line and makes it difficult to read


where is the new file speedy?
thanks for the help matey

[speedyandre]

where is the new file speedy?
thanks for the help matey

List1.bat (http://home.zonnet.nl/highend/list1.bat)
It's on the same location as my other files ;)
Maybe Kobrakaan can add it to his startpost and add the comments about getting the numbers in a text file on the desktop :)
The only difference according to list.bat is that I added a command to put the numbers in a text file.
When you run List1.bat on the desktop the last text file will be overwritten.

André